30 "Quad" "Pto"3
ALL VEGETATION PROCESSOR
30QP3(PTO Model)
Power take off specs| HOOK UP TYPE | 3-point hitch cat I&II |
| RPM | 540 |
| MINIMUM REQUIRED HORSE POWER | 22 |
| PTO SHAFT | Heavy duty1-3/8 yoke with quick coupler and safety shear bolt |
| Weight (add approx. 85 lbs. for ship wgt.) | 945 lbs |
| Height | 83 inches |
| Width | 54 inches |
| Length | 46 inches |
| Frame | Structural steel |
| BELTS | Direct belt w/ 4 groove power band belt |
| MAXIMUM LIMB CAPACITY | 6 inches |
| HOPPER OPENING | 5½ sq. ft 117 sq. in. |
| DISC CHAMBER DIAMETER | 30 inches |
| DISC THICKNESS | 4¾ inches |
| KNIFE LENGTH | 7 inches |
| NUMBER OF KNIVES | 4 |
| NUMBER OF TWIN-BLADED FLAILS | 4 |
| DISCHARGE CHUTE | 360° full swivel w/ discharge deflector |
| BED KNIFE BAR | Quadruple bladed saving you money |
SUGGESTED RETAIL PRICE:$ 5,495.00
PTO MODELS CAN BE OPERATED ON-THE-GO OR ON-THE-GROUND, AND
EACH LEG CAN INDIVIDUALLY ADJUST TO UNEVEN TERRAIN
COMPARED TO TOW OR PLATFORM UNITS WITH SPECIFIC HORSEPOWER
ENGINES, PTO MODELS CAN BE OPERATED WITH LARGE HORSE POWER TRACTORS
SHEAR
YOKES FULLY PROTECT THE AVP FROM OVERLOADING
NON-CLOGGING, FAST SINGLE FEED HOPPER FOR ALL KINDS OF VEGETATION
NO CONFUSION FROM MULTIPLE HOPPERS, THE AVP DOES IT ALL FROM
ONE HOPPER
MINIMAL TRIMMING OF LATERAL BRANCHES REQUIRED
360° EXHAUST SWIVEL CHUTE FOR CONVENIENT DISCHARGE
EXCLUSIVE
CIRCLE OF SAFETY DESIGN™ KEEPING YOU AND YOUR OPERATORS AT A SAFE DISTANCE
FROM THE CHIPPING CHAMBER
ORIGINAL SPLIT PROCESSOR HOUSING DESIGN GIVES YOU INSTANT ACCESS TO THE
BLADES, TRIDENT CUTTER, AND FLAILS FOR EASIER INSPECTION OR SERVICING
